17FC 83
english / USA
Change the fuel pick up body every
year.
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is dry.
Controls
Throttle trigger interlock (1), throttle
trigger (2) and slide control (3) with
positions:
START (4),
# – normal run position (5) and
$ – stop (6).
To stop the engine: Push the slide
control in direction of c (7).
Starting
: Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
: While holding both levers in this
position, move the slide control to
START and hold it there.
: Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the starting
throttle position.
243BA009 KN
Starting / Stopping
the Engine
3
2
3
1
START
STOP
4
5
6
7
002BA037 KN
To Next Page
Loading...
