Stihl FS 161 User Manual

For information on compliance with the Physical
Agents (Vibration) Directive 2002/44/EC, see
www.stihl.com/vib.
19.5 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19.6 Exhaust Emissions
The CO
2
value measured in the EU type appro‐
val procedure is specified at www.stihl.com/co2
in the product-specific technical data.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardised test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
20 Combinations of Cutting Attachments, Deflectors and Carrying
Systems
20.1 Combinations of Cutting Attachments, Deflectors and Carrying Systems
Cutting attachment Deflector Carrying System
–
AutoCut 46-2 mowing head
–
DuroCut 40-4 mowing head
–
SuperCut 40-2 mowing head
–
TrimCut C 42-2 mowing head
–
Guard for
mowing heads
–
Universal deflec‐
tor with skirt and
line limiting
blade
–
Full harness with quick-release
system
–
Grass cutting blade 230-4 (230 mm
dia.)
–
250-32 Grass cutting blade (250 mm
dia.)
–
Special grass cutting blade 250-40
(250 mm dia.)
–
255-8 Grass cutting blade (255 mm
dia.)
–
Universal deflec‐
tor without skirt
–
Brush knife 300-3 (300 mm dia.)
–
Brush knife 305-2 Special (305 mm
dia.)
–
Universal deflec‐
tor without skirt
–
Circular saw blade 200-22, chisel tooth
(4119) (200 mm dia.)
–
Circular saw blade 200-44, scratcher
tooth (4000) (200 mm dia.)
–
Circular saw blade 225-24, chisel tooth
(4000) (225 mm dia)
–
Circular saw blade 225-24, chisel tooth
(4110) (225 mm dia)
–
Circular saw blade 225-36, carbide
(4000) (225 mm dia.)
–
Circular saw blade 225-48, scratcher
tooth (4000) (225 mm dia.)
–
Circular saw blade 225-22 HP, chisel
tooth (4000) (225 mm dia.)
–
Limit stop
–
Shredder blade 270-2 Shredder blade
deflector
English 20 Combinations of Cutting Attachments, Deflectors and Carrying Syst…
52 0458-034-8701-A

Stihl FS 161 Specifications

General

Brand	Stihl
Model	FS 161
Category	Lawn and Garden Equipment
Language	English