FS 260 C, FS 360 C
English
48
4 Metal Mowing Tool
The cutting attachment, i. e. blade,
made from metal for different
purposes.
5 Deflector for Metal Mowing Tools
Designed to reduce the risk of injury
from foreign objects flung
backwards toward the operator by
the cutting attachment and from
contact with the cutting attachment.
6 Circular Saw Blade
7 Limit Stop for Circular Saw Blade
Definitions
6 Circular Saw Blade
Cutting attachment made of metal
for cutting wood.
7 Limit Stop for Circular Saw Blade
Designed to position the brushcutter
steady against the wood in order to
reduce the risk of injury from loss of
control from reactive forces such as
thrust out.
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Engine
Single cylinder two-stroke engine
FS 260 C:
FS 360 C:
Ignition System
Electronic magneto ignition
Specifications
A = 300 hours
B = 125 hours
C = 50 hours
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Displacement: 41.6 cc
(2.54 cu.in)
Bore: 42 mm (1.65 in)
Stroke: 30 mm (1.18 in)
Engine power to
ISO 8893:
2.0 kW (2.7 bhp)
at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed
(rated): 12,500 rpm
Max. output shaft
speed (cutting
attachment): 9,000 rpm
Displacement: 37.7 cc
(2.30 cu.in)
Bore: 40 mm (1.57 in)
Stroke: 30 mm (1.18 in)
Engine power to
ISO 8893:
1.7 kW (2.3 bhp)
at 8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed
(rated): 12,500 rpm
Max. output shaft
speed (cutting
attachment): 9,000 rpm
Spark plug (resistor
type): NGK CMR6H
Electrode gap: 0.5 mm (0.02 in)
To Next Page
Loading...
