FS 300, FS 350, FS 380
English
66
NOTICE
Remove the tool used to block the shaft.
Removing the cutting attachment
N Block the shaft
N Unscrew the nut clockwise
N Remove cutting attachment and its
mounting hardware from the
gearbox
Shredder blade 270-2
Mounting the cutting attachment
N Attach guard ring for mowing
applications
N Fit shredder blade (1). The cutting
edges must face upward
WARNING
Collar (a) must engage the hole (b) in
the cutting attachment!
Securing the cutting attachment
N Fit the thrust washer (2) – curvature
faces upward
N Fit guard ring (3)
N Block the shaft
N Screw nut (4) counterclockwise
onto shaft and tighten.
WARNING
Nuts that move too easily must be
replaced.
NOTICE
Remove the tool used to block the shaft.
Removing the cutting attachment
N Block the shaft
N Unscrew the nut clockwise
N Remove cutting attachment and its
mounting hardware from the
gearbox
Circular saw blades 200 and 225
Position cutting attachment
With grass cutting blades, the cutting
edges must face clockwise.
Mounting the cutting attachment
N Attach guard ring for sawing
applications
N Position cutting attachment (1)
To Next Page
Loading...
