Stihl FS 410 C K

FS 410 C K
English
16
Cliplock filler cap (bayonet-type)
Opening screw-type tank cap
N Turn the cap counterclockwise until
it can be removed from the tank
opening.
N Remove the cap.
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for fuel (special accessory).
N Filling up with fuel
Closing screw-type tank cap
N Place the cap in the opening.
N Turn the cap clockwise as far as
stop and tighten it down as firmly as
possible by hand.
Opening tank cap with hinged grip
N Swing the grip to the upright
position.
N Rotate the cap about 1/4 turn
counterclockwise.
N Remove the cap.
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for fuel (special accessory).
N Filling up with fuel
Closing tank cap with hinged grip
Grip must be vertical:
N Fit the cap in the opening – the
marks on the cap and filler neck
must line up.
N Press the cap down as far as stop.
2709BA002 KN
2709BA003 KN
2709BA004 KN
2709BA005 KN
2709BA006 KN
2709BA007 KN
2709BA008 KN