EasyManua.ls Logo

Stihl FS 46 - Specifications

Stihl FS 46
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37FS 45, FS 46
English
EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category:
A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
Engine
Ignition System
Type: Electronic (breakerless) magneto
ignition
This spark ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Regulations ICES-002.
Fuel System
Carburetor: All position diaphragm
carburetor with integral fuel pump
Weight
Standard versions:
1) Version with catalytic converter
Versions with ErgoStart:
Single cylinder two-stroke engine
Displacement: 27.2 cm
3
Bore: 34 mm
Stroke: 30 mm
Engine power to
ISO 8893: 0.75 kW (1 bhp)
7000 rpm
Idle speed: 2,800 rpm
Max. engine speed
:
9,500 rpm
Max. output shaft
speed (cutting tool): 9,500 rpm
Specifications
Spark plug
(suppressed): Bosch WSR 6 F,
NGK BPMR 7 A
Electrode gap: 0.5 mm
Spark plug thread: M 14 x 1.25;
9.5 mm long
Air filter: Felt element
Fuel tank capacity: 0.33 L (330 cm
3
)
Fuel mix: See chapter
“Fuel“
without mowing head and deflector:
FS 45 4,1 kg
FS 45
1)
4,2 kg
FS 46 4,2 kg
FS 46
1)
4,3 kg
without mowing head and deflector:
FS 45 C 4,3 kg
FS 46 C 4,4 kg

Table of Contents

Related product manuals