FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L
English
19
2 STIHL AutoCut 40-2
3 STIHL AutoCut 40-4
4 STIHL TrimCut 41-2
5 STIHL DuroCut 40-4
6 STIHL PolyCut 41-3
Metal cutting attachments
7 Grass cutting blade 230-4
(Ø 230 mm)
8 Grass cutting blade 255-8
(Ø 255 mm)
9 Brush knife 300-3
(Ø 300 mm)
10 Scratcher tooth circular saw blade
200
(Ø 200 mm)
11 Chisel tooth circular saw blade 200
(Ø 200 mm)
12 Scratcher tooth circular saw blade
225
(Ø 225 mm)
13 Chisel tooth circular saw blade 225
(Ø 225 mm)
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stops
14 Deflector for mowing heads
15 Deflector for metal cutting
attachments, items 7 to 9
16 Limit stop for circular saw blades,
items 10 and 11
17 Limit stop for circular saw blades,
items 12 and 13
Harness
18 Full harness must be used
WARNING
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of
control and contact with the cutting
attachment.
Use grass cutting metal blades, brush
knifes and circular saw blades on this
unit only if equipped with a bike handle.
Do not use rigid polymer blades on this
unit.
Mounting Bike Handle with Swivelling
Handle Support
Do not rotate the control handle (1)
between unpacking and mounting it on
the handlebar; see also chapter on
"Adjusting the Throttle Cable".
Mounting the Bike Handle
To Next Page
Loading...
