FS 55, FS 55 C, FS 55 R, FS 55 RC
English
30
N Use a sharpening file (see "Special
Accessories") to sharpen dull
cutting attachments. In case of
more serious wear or nicks:
Resharpen with a grinder or have
the work done by a dealer – STIHL
recommends a STIHL servicing
dealer.
N Resharpen frequently, take away as
little material as possible: two or
three strokes of the file are usually
enough.
N Resharpen the cutters (1) uniformly
– do not alter the contour or the
parent blade (2) in any way.
See cutting attachment packaging for
additional sharpening instructions.
Balancing
N After resharpening about 5 times,
check the cutting attachment for
out-of-balance on a STIHL balancer
– see “Special Accessories” – or
have it checked by a dealer and re-
balanced as necessary – STIHL
recommends a STIHL servicing
dealer.
Maintenance Work
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
Fuel Pickup Body in Tank
N Have the pickup body in the fuel
tank replaced every year.
Spark Arrestor in Muffler
N If the engine is down on power,
have the spark arrestor in the
muffler checked. The spark arrestor
is not installed in all markets
Lubricating the Gearbox
N Have the grease level in the
gearbox checked regularly – about
every 25 hours of operation.
Sharpening Metal Cutting
Blades
To Next Page
Loading...
