Stihl KW 85 - Starting the Engine: Controls and Setup; Controls Overview; Initial Starting Setup

15KW 85
english / USA
: Loosen the screw (3).
: Slide the clamp up or down the drive
tube so that the sweeper belts touch
the ground.
: Tighten the screw firmly.
Controls
Throttle trigger interlock (1), throttle
trigger (2) and slide control (3) with
positions:
START (4),
# - normal run position (5), idle position
and
$ - stop (6),
to stop engine, move slide control in
direction of c (7).
Starting
: Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
: While holding both levers in this
position, move the slide control to
START and hold it there.
: Now release the throttle trigger,
slide control and throttle trigger
interlock in that order. This is the
starting throttle poistion.
3
223BA012 KN
223BA013 KN
Starting
3
2
3
1
START
STOP
4
5
6
7
002BA037 KN