26
english / USA
KW 85
: Straighten the ends of the cotter pin,
remove the cotter pin.
: Pull the sweeper drum off the axle.
: Repeat the procedure on the other
side.
: Examine gear housing for signs of
oil. If leaks are found, have your
STIHL dealer check the gearbox.
: Push new sweeper drum (6) onto
the axle (2).
: Fit new cotter pin (7) in end of
axle (2) and bend over the ends (8)
of the cotter pin as shown.
: Repeat the procedure on the other
side.
: Always replace sweeper drum
assemblies in pairs.
: Take out the screws (1).
: Remove the cable lug.
: Lift the starter cover (2) away from
the tank (3) and pull it out from
under the shroud (4).
Replacing Sweeper Drum
223BA022 KN
223BA009 KN
6
2
88
7
223BA010 KN
2
Replacing the Starter Rope
and Rewind Spring
386BA004 KN
1
1
1
2
3
4