MS 201 C-M
English
39
If there is a noticeable loss of engine
power
N Turn the twist lock 90°
counterclockwise.
N Remove the shroud upwards.
N Remove the air filter upwards.
N Wash the filter in STIHL special
cleaner (special accessory) or a
clean, non-flammable solution (e.g.
warm soapy water) and then dry.
NOTICE
Do not clean a fleece filter (option) with
a brush.
Always replace a damaged filter.
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
Basic information
M-Tronic regulates the fuel quantity and
ignition timing for all operating states
electronically.
M-Tronic stands for easy, fast starting,
constant optimum engine performance,
outstanding acceleration and automatic
adaptation to changes in operating
conditions.
Manual carburetor adjustments are no
longer required – the carburetor does
not have any adjusting screws.
Automatic adjustment
Under extremely changed operating
conditions, attainment of the optimal
setting can be accelerated as follows:
N Carry out five uniform cuts to length
under full load
Cleaning the Air Filter
Engine Management M-Tronic
To Next Page
Loading...
Need help?
General
Weight and Dimensions
