31MS 360 C
english / USA
Opening the cap
: Raise the grip until it is upright
: Turn the cap counterclockwise
(approx. a quarter turn)
: Remove the filler cap
Closing the cap
: Fit the cap - grip upright -marks
must line up
: Turn the cap clockwise as far as
stop (approx. a quarter turn)
: Fold the grip flush with the top of the
cap.
If the grip does not lie completely flush
with the cap and the detent on the grip
does not engage the recess in the filler
neck, the cap is not properly seated and
tightened and you must repeat the
above steps.
Change the fuel pickup body once
every year
: Drain the fuel tank.
: Use a hook to pull the fuel pickup
body out of the tank and take it off
the hose.
: Push the new pickup body into the
hose.
: Place the pickup body in the tank.
209BA001 KN
209BA002 KN
209BA003 KN209BA004 KN
176BA001 KN
To Next Page
Loading...
Need help?
General
