Stihl MS 360 C User Manual

59MS 360 C
english / USA
Engine
Ignition System
Type: Electronic magneto ignition
Spark plug (suppressed):
Bosch WSR 6 F, NGK BPMR 7 A,
Champion RCJ 6 Y
Electrode gap: 0.02 in (0,5 mm)
Spark plug thread:
M 14x1,25; 0.37 in (9,5 mm) long
Rewind Starter
Starter rope:
0.14 in (3,5mm) dia. x 37.8 in (960 mm)
Carburetor
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity
1.32 US pt (0,625 l)
Chain lubrication
Fully automatic, speed-controlled
reciprocating oil pump. Additional
manual oil flow control
Oil tank capacity
0.68 US pt (0,32 l)
Weight (without bar and chain)
12.8 lb (5,8 kg)
Cutting Attachment
Recommended cutting attachments
for compliance with § 5.12 of ANSI
Standard B 175.1-2000
(see page 14 of this Manual):
STIHL reduced kickback bar
(with green label) for 0.325" and 3/8"
pitch:
Rollomatic with sprocket nose
40, 45 or 50 cm (16, 18 or 20 in)
STIHL low kickback chain
1)
(with green label) for 3/8" pitch:
8.25 mm (0.325") Rapid-Micro 2
(26 RM 2)
9.32 mm (3/8") Rapid-Micro 2
(33 RM 2, 36 RM 2)
Chain sprocket:
8-tooth for 0.325" pitch spur sprocket
7-tooth for 3/8" pitch spur sprocket
1)
See definition of "low kickback
chain" on page 17.
In order to comply with the kickback
performance requirements of § 5.12
of ANSI Standard B 175.1-2000,
do not use replacement saw chain
unless it has been designated as
meeting the ANSI § 5.12 requirements
on this specific powerhead, or has been
designated as "low kickback" saw
chain
1)
in accordance with the
ANSI B 175.1-2000 standard.
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Other bars and chains available for this
powerhead are:
STIHL yellow-labeled bars:
for 0.325" and 3/8" pitch:
Rollomatic "S" with sprocket nose
40, 45 or 50 cm (16, 18 or 20 in)
60 cm (24 in) only 3/8" pitch
Duromatic with stellite tipped nose
40, 45 or 50 cm (16, 18 or 20 in)
60 cm (24 in) only 3/8" pitch
STIHL yellow -labeled chains:
for 0.325" pitch
Rapid-Micro (26 RM),
Rapid-Super (26 RS)
for 3/8" pitch:
Rapid-Micro (33 RM, 36 RM),
Rapid-Super (33 RS, 36 RS, 33 RSL).
Rapid-Duro (33 RD)
1)
See definition of "low kickback
chain" on page 17.
STIHL single cylinder two-stroke
engine
Displacement: 3.75 cu.in (61,5 cm
3
)
Bore: 1.89 in (48 mm)
Stroke: 1.34 in (34 mm)
Idle speed: 2.800 rpm
Specifications

Stihl MS 360 C Specifications

General

Brand	Stihl
Model	MS 360 C
Category	Chainsaw
Language	English