Stihl MS 650

107MS 650, MS 660
r
No. Part Name Part No. Application Rem.
34 Fuel hose 1110 141 8600 Testing carburetor for leaks
35 - Nipple 0000 855 9200 Testing carburetor for leaks
36 Puller 5910 890 4500 Removing limiter cap
37 - Setting disk 5910 893 6600 Installing limiter cap
38 Drift 1114 893 4700 Installing sleeve
39 Assembly stand 5910 890 3100 Holding saw for servicing/repairs
40 Torque wrench 5910 890 0301 0.5 to 18 Nm
Alternative: Torque wrench
5910 890 0302 with optical/acoustic
signal
41 Torque wrench 5910 890 0311 6 to 80 Nm
Alternative: Torque wrench
5910 890 0312 with optical/acoustic
signal
42 Crimping tool 5910 890 8210 Attaching connectors to electrical
wires
43 Screwdriver bit T 27 x 125 0812 542 2104 Removing and installing spline socket
head screws with electric or pneumatic
screwdrivers; tighten down screws with
torque wrench
44 T-handle screwdriver T 27 x 150 5910 890 2400 IS-P screws (4 mm) 1)
45 Pliers, DIN 5254-A 19 0811 611 8380 Removing and installing external
circlips
Remarks:
1) Use only for releasing P screws.