For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Bar and Chain Combinations
20.1 STIHL MSA 220 T, MSA 220 TC Chainsaw
Pitch Drive link
gauge/groove
width
Length Guide bar Number of
teeth, spro‐
cket nose
Number of
drive links
Saw chain
3/8" P 1.3 mm
30 cm Rollomatic E /
Light 04
Rolloma‐
tic E Light /
Light P04
9
44
63 PM3 (3636)
63 PS3 (3616)
CM 35 50
40 cm 55
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
22 Disposal
22.1 Disposing of Chainsaw and
Battery
Information on disposal is available from STIHL
servicing dealers.
► Dispose of the saw, guide bar, saw chain, bat‐
tery, accessories and packaging in accord‐
ance with local regulations and environmental
requirements.
23 EC Declaration of Con‐
formity
23.1 STIHL MSA 220.0 T, MSA
220.0 TC Chainsaw
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
–
Category: Cordless chainsaw
–
Manufacturer's brand: STIHL
–
Model: MSA 220.0 T, serial number: MA01
–
Model: MSA 220.0 TC, serial number: MA01
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN 55014‑1, EN 55014‑2, EN 62841‑1, and
EN 11681‑2 (where applicable).
The EC type examination test was carried out
pursuant to Directive 2006/42/EC, Art. 12.3(b) at:
VDE Prüf- u. Zertifizierungsinstitut (NB 0366),
Merianstraße 28, 63069 Offenbach, Germany
–
Certification number: 40052944
The measured and guaranteed equivalent sound
power level has been determined in accordance
with Directive 2000/14/EC, Annex V.
–
Measured sound power level: 104 dB(A)
–
Guaranteed sound power level: 106 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture, country of manufacture
and serial number are applied to the chainsaw.
Waiblingen, 02.06.2021
ANDREAS STIHL AG & Co. KG
pp
20 Bar and Chain Combinations English
0458-007-9621-A 49
To Next Page
Loading...
Need help?
General
