Stihl RE 110 - 11 During Operation; 11.1 Activating and Locking the Spray Gun Trigger

0458-620-8221-A
25
English 11 During Operation
NOTICE
When the pressure washer is switched on, voltage
fluctuations may occur under unfavorable mains conditions
with a power line impedance greater than 0.15 Ohm. The
voltage fluctuations may negatively affect other connected
electrical appliances.
10.2 Switching Off
To switch the pressure washer off:
► Set the switch to the 0 position.
11.1 Activating and Locking the Spray Gun Trigger
The pressure washer is designed for two-handed operation.
Activating the spray gun trigger
To pull the spray gun trigger:
► Slide the retaining latch (1) to the position.
► Press and hold the spray gun trigger (2).
The high-pressure pump starts up automatically and water
flows out of the nozzle.
Locking the spray gun trigger
To lock the spray gun trigger:
► Release the spray gun trigger (2).
The high-pressure pump switches off automatically when
you release the spray gun trigger. Water stops flowing out
of the nozzle but the pressure washer remains switched
on.
► Slide the retaining latch (1) to the position to lock the
spray gun trigger.
11 During Operation
0000-GXX-4358-A0
0000-GXX-4360-A0
1
2
0000-GXX-4612-A0
1
2