Stihl RE 110 - 15 Cleaning; 15.2 Cleaning the Nozzle and Spray Lance; 15.3 Cleaning the Water Intake Screen

0458-620-8221-A
31
English 15 Cleaning
15.2 Cleaning the Nozzle and Spray Lance
A clogged high pressure nozzle can cause excessive
pressure to build in the pump. Clean the high-pressure
nozzle if it becomes clogged.
To clean the nozzle and spray lance:
► Rinse the nozzle and spray lance under running water and
dry them with a cloth.
► If the nozzle is blocked, use the cleaning needle to clear
the opening.
15.3 Cleaning the Water Intake Screen
To clean the water intake screen:
► Unscrew the coupling (1).
► Pull out the water intake screen (2).
► Rinse the water intake screen under warm running water.
► Re-insert the water intake screen.
► Screw on the coupling and tighten it by hand.
15.4 Cleaning the Water Filter
To clean the water filter:
► Remove the gasket (1) from the fastener (2).
► Unscrew the fastener from the filter housing (5).
► Remove the gasket (3) from the fastener.
► Remove the filter element (4) from the filter housing.
0000-GXX-4369-A0
0000-GXX-4370-A0
1
2
0000-GXX-7032-A0
5
1
0000-GXX-4373-A0
2
3
1
4