Stihl RE 110 - 12 After Finishing Work; 12.1 Preparing for Transportation or Storage

0458-620-8221-A
28
English 12 After Finishing Work
12.1 Preparing for Transportation or Storage
To prepare the pressure washer for transportation or
storage:
► Switch off the pressure washer, @ 10.2.
► Disconnect the pressure washer from the power supply.
► Disconnect the pressure washer from the water supply.
► Press the spray gun trigger to relieve any remaining
pressure in the system.
► Lock the spray gun trigger.
► Disconnect the water hose.
► Remove and clean the nozzle and spray lance.
► Remove the spray gun and let the rest of the water run out
of the spray gun.
► If the pressure washer will be exposed to freezing
temperatures, protect it with antifreeze or take other
measures outlined below, @ 12.2.
► Clean the pressure washer.
► Turn the bracket (1) upwards.
► Roll up the power supply cord (2) and hang it onto the
brackets (1).
► Secure the power supply cord with the clip (3).
► Insert the fan-jet nozzle (4) and rotary-jet nozzle (5).
► Insert the detergent spray set (6).
► Wind up the high-pressure hose (7) and stow it on the
bracket (8).
► Place the spray attachment in one of the holders (9).
12 After Finishing Work
4
2
0000-GXX-7816-A0
5
3
1
0000-GXX-7020-A0
6
0000-GXX-4367-A1
7
8
9
9
0000-GXX-7815-A0
9
9
9