RE 108, RE 118, RE 128 PLUS
English
38
Actuating the spray gun
N Point the spray gun at the object to
be cleaned – never at persons!
N Point the rotary nozzle downwards
when starting (if fitted)
N Press the safety latch (2) downward
– the lever (1) is unlatched
N Squeeze the lever (1)
The motor stops when the lever is
released.
Standby mode
NOTICE
The machine must not be operated in
standby mode for more than 5 minutes.
If work is interrupted for more than
5 min., during breaks or if the machine is
left unattended, switch off the machine
at the master switch – see "Switching off
the machine".
High-pressure hose
NOTICE
Do not buckle or loop the high-pressure
hose.
Do not place any heavy objects on the
high-pressure hose, and do not drive
any vehicles over it.
Nozzles
Fan-jet nozzle (1)
The operating pressure can be infinitely
adjusted at the nozzle.
Jet angle 15°, maximum effect at a
distance of approx. 7 cm.
N Turn nozzle sleeve
Rotary nozzle (2)
Nozzle with rotating jet for stubborn dirt
on hard surfaces. Maximum effect at a
distance of 10 cm.
The spray attachment can also be used
without nozzles at low pressure, e.g., for
rinsing with a large flow of water.
Storage compartment for nozzles
N Open the flap – the rotary nozzle
and fan jet nozzle can be stored in
the holders
Storing accessories
Spray gun, spray lance, detergent bottle
and cleaning pin can be stored directly
on the machine – see "Main Parts".
Working
To Next Page
Loading...
