RE 108, RE 118, RE 128 PLUS
English
39
Detergent must not be allowed to dry on
the object to be cleaned.
N Remove nozzle from spray lance –
see "Fitting, removing spray lance"
N Install spray set (3) on spray
lance (1) – the spray set has an anti-
twist device; orient this according to
the groove on the spray lance
Fill the container of the spray set with
STIHL detergent diluted as directed
(approx. 0.5 liters).
N RE 118 and 128 Plus only: Use the
adjusting ring (4) to set the quantity
of detergent to be added
N When applying detergent, start at
the bottom and work upwards
Maximum effect at a distance of 1 m.
N Turn the master switch to 0 and turn
off the water supply
N Actuate the spray gun until water
only drips from the spray head (the
machine is now depressurized)
N Release trigger
N Press the safety latch upward – the
spray gun is locked to prevent
inadvertent operation
N Unplug the power plug from the
socket
N Disconnect hose from the water
supply and from the machine
After use
N Rinse the connection latches of the
spray lance and nozzle with water
so that no deposits form
N Roll the high-pressure hose and
power cable up on the holders
provided for this purpose – see
"Main Parts"
Adding detergent
To Next Page
Loading...
