RE 143, RE 143 PLUS, RE 163, RE 163 PLUS
English
41
detergent is swallowed,
seek medical attention
immediately. Note the
manufacturer's safety data
sheets!
Before starting work
Only connect the high-
pressure cleaner to the
drinking water main in
conjunction with a backflow
preventer – see "Special
accessories".
WARNING
– If drinking water has
passed through the
backflow preventer, it can
no longer be regarded as
drinking water.
Do not use the machine with
dirty water.
If there is a risk that dirty water
will occur (e. g., flowing sand),
an appropriate water filter
must be used.
Inspect the high-pressure
cleaner
WARNING
– The high-pressure cleaner
should only be used if it is
in full working order and
undamaged – risk of
accident!
– It must be possible to
move the switch to the 0
position easily
– The switch must be in the 0
position
– Do not use the machine
with a damaged high-
pressure hose, spray
attachment and safety
devices
– High-pressure hose and
spray attachment in good
condition (clean, moving
easily) and correctly
assembled
– For good control of the
machine, the handles
should be clean and dry
with no oil or dirt on them
– Never attempt to modify
the controls or safety
devices in any way
Electrical connection
WARNING
Minimize the risk of electrical
shock:
– Voltage and frequency of
the machine (see rating
plate) must match the
voltage and frequency of
the mains supply
– Examine the power cord,
power plug and extension
cord for damage. Do not
use the machine with a
damaged power cord,
extension cord or
damaged power plug
– Only connect the machine
to a correctly installed
power socket
– The insulation on the
power cord and any
extension cord, the plug
and the coupling must be
fully intact
– Never touch the power
plug, power cord and
extension cord and
electrical plug connections
with wet hands
Do not connect the
high-pressure
cleaner directly to
the drinking water
main.
To Next Page
Loading...
