Stihl RE 163 - Connection to the power supply socket; Switching On; Working; Actuating the spray gun

RE 143, RE 143 PLUS, RE 163, RE 163 PLUS
English
51
Connection to the power supply socket
Before connection to the power supply,
check that the machine is switched off –
see "Switching off the machine"
N Swivel the lower holder upward and
remove the power cord
N Plug the power cord or extension
cord into a properly installed outlet
N Turn on water supply
NOTICE
The machine may only be switched on
when the water intake hose is connected
and the water supply has been turned
on. Otherwise the machine may be
damaged due to lack of water.
N Completely unroll the high-pressure
hose
N Turn the master switch to I – now
the machine is in standby mode
Actuating the spray gun
N Point the spray gun at the object to
be cleaned – never at persons!
N Point the rotary nozzle downwards
when starting (if fitted)
N Press the safety latch (2) downward
– the lever (1) is unlatched
N Squeeze the lever (1)
The motor stops when the lever is
released.
Standby mode
NOTICE
The machine must not be operated in
standby mode for more than 5 minutes.
If work is interrupted for more than
5 min., during breaks or if the machine is
left unattended, switch off the machine
at the master switch – see "Switching off
the machine".
1607BA035 KN
Switching On
1607BA011 KN
Working
1
2
650BA014 KN