RE 143, RE 143 PLUS, RE 163, RE 163 PLUS
English
49
Flat hose
*
Connecting
N Press the catch hook (1) and fold
out the flat hose cassette (2)
N Remove the flat hose cassette (2)
upward from the holder
N Connect the flat hose to the water
supply
N Unroll the flat hose (3) from the flat
hose cassette completely
N Open the safety latch (4) and
remove the end of the house with
the coupling
N Lay out the flat hose so that it is free
from kinks or loops
N Push the coupling (5) on to the hose
connector (6)
N Turn on water supply
Connection to the drinking water main
When hooking up to the drinking water
main, a backflow preventer (in
accordance with IEC/EN 60335-2-79)
must be installed between the water tap
and the hose.
If drinking water has passed through the
backflow preventer, it can no longer be
regarded as drinking water.
Follow the rules laid down by the local
water supply company to prevent water
flowing back from the high-pressure
cleaner into the drinking water main.
*
Depending on the country, the flat
hose cassette is included or is
available as a special accessory
To Next Page
Loading...
Need help?
General
