RE 361, RE 361 PLUS, RE 461, RE 461 PLUS, RE 471 PLUS
English
52
Pipe cleaning kit
in lengths 10 or 20 m
There is a mark (arrow) at the end of the
hose:
N Push the hose into the pipe to be
cleaned until this mark is reached –
then switch on the machine
When this mark appears as the hose is
pulled out of the pipe:
N Switch off machine
N Actuate the spray gun until the
machine has been depressurized
N Pull the hose out of the pipe
completely
The hose must never be pulled out of the
pipe when the machine is switched on.
Other special accessories
Rotary washing brush – exchangeable
brush insert.
Wash brush – for mounting on straight or
angled spray lances.
Spray lance, straight – in lengths 350,
500, 1070, 1800 or 2500 mm.
Spray lance, angled – in length
1070 mm; spray lance, angled – do not
direct around blind corners behind which
other people may be concealed.
Rotary nozzle with spray lance – in
length 950 mm; for large areas and very
stubborn dirt. (supplied as standard with
Plus models)
High-pressure hose extension – DN 08,
connection M27x1.5; steel braided,
reinforced, in lengths 10, 15 or 20 m.
Always use only one high-pressure hose
extension.
High-pressure hose adapter –
connection M27x1.5; for connection of
high-pressure hose and high-pressure
hose extension.
Adapter – for connection of accessories
with screw coupling and spray guns with
push-in coupling.
Sand and wet-blasting unit – for sand-
blasting, e. g., stone or metal.
Water filter – for filtering water from the
water main, as well as for use in
pressureless suction operation.
Backflow preventer – Type BA in
accordance with EN 1717, for
connection of the high-pressure cleaner
to the drinking water supply.
Suction set – professional version, 3/4",
length 3 m.
Ask your STIHL dealer for current
information on this and other special
accessories.
Special Accessories
To Next Page
Loading...
