Stihl RE 661 - Hose and Lance Fitting; High-Pressure Hose Connection;Disconnection

RE 661, RE 661 PLUS, RE 961 PLUS
English
44
Fill with STIHL scale inhibitor
N Open storage tank cap (1)
N Fill with STIHL scale inhibitor
N Replace cap on storage tank
N Pull back and hold the coupling (1)
N Push the spray lance (2) into the
mount on the spray gun, or pull it out
to remove the spray gun,
respectively
N Release the coupling (1)
Machines without hose reel
Connecting the high-pressure hose
N Push high-pressure hose (1) onto
the connector
N Attach union nut (2) and screw it on
and tighten by hand
Disconnect the high-pressure hose
N Unscrew the union nut (2)
N Pull high-pressure hose (1) off of
connector
Machines with hose reel
The high-pressure hose is already
connected.
°e < = 15 1 : 1
> 15 undiluted
°f < = 21.4 1 : 1
> 21.4 undiluted
ppm CaCO
3
< = 214 1 : 1
> 214 undiluted
mval/l < = 4.28 1 : 1
> 4.28 undiluted
mmol/l < = 2.14 1 : 1
> 2.14 undiluted
Fitting, removing spray
lance
647BA021 KN
1
2
Fitting, removing high-
pressure hose