EasyManua.ls Logo

Stihl RE 661 - Detergent Calculation and Steam Cleaning; Detergent Concentration and Predilution Calculation; Steam Cleaning Mode Setup and Use

Stihl RE 661
220 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RE 661, RE 661 PLUS, RE 961 PLUS
English
53
N Hold the spray gun in a suitable
empty receptacle (> 20 l) and
actuate for exactly 1 minute
N Read the detergent consumption
"QR" on the scale
Calculating the actual detergent
concentration:
QR = amount of consumed
detergent (in l/min)
Q = Water without detergent
(in l/min)
V = Predilution of detergent (in %)
If the actual concentration deviates from
the desired concentration, reset knob
and repeat measurement if necessary.
Calculating the predilution of the
detergent in %
If the predilution is not indicated as a
percentage, it can be calculated using
the following table:
Example:
Calculation ratio of 1:2
A=1
B=2
N Open the side cover – see "Open
shroud"
N Turn the knob on the pressure and
flow control counter-clockwise as
far as possible
N Turn the master switch to uv
N Set the knob to the desired
temperature (above 100 °C or
212 °F respectively)
Use the steam nozzle for professional
steam cleaning and special applications
– see "Special accessories".
QR
x V = concentration
Q
Ratio
1:1 = 50 %
1:2 = 33.3 %
1:3 = 25 %
1:5 = 16.6 %
1:10 = 9 %
A
x 100 = value in %
(A + B)
1
x 100 = 33.3 %
(1 + 2)
Steam cleaning mode

Table of Contents

Related product manuals