RE 661, RE 661 PLUS, RE 961 PLUS
English
51
Standard position
Move the setting lever to standard
position: Maximum working pressure
and water flow rate.
Reduced working pressure and water
flow rate
The setting lever can be used to adjust
the working pressure and water flow rate
in fine increments.
Pressure control at the nozzle
The operating pressure can be infinitely
adjusted at the nozzle.
N Turn the nozzle sleeve – the
quantity of water delivered remains
unchanged
High-pressure hose
PLUS models with hose reel
Storing accessories
Roll up the power cable and high-
pressure hose. Store the spray
attachment directly on the machine.
Machines without hose reel
Machines with hose reel
Do not buckle or loop the high-
pressure hose.
Do not place any heavy objects on
the high-pressure hose, and do
not drive any vehicles over it.
In hot-water operation, completely
unroll the high-pressure hose from
the hose reel. Otherwise heat may
cause deformation of the hose
reel.
To Next Page
Loading...
