49
DEFRNLITESPTNOSVFIDASLHUSRHR EN
0478 131 9939 A - EN
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– damage to the drive motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots),
– corrosive and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
– damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
Lawn clippings should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal (Ö 4.12).
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.
Always dispose of batteries
properly – observe local
regulations. Do not dispose of
batteries with domestic waste,
but hand it in to a specialist
dealer or at a hazardous waste collection
point.
Mowing blade:
6357 702 0101
Blade fastening screw:
9008 319 9028
Retaining washer:
0000 702 6600
18.1 Lawn mower, manually operated
and battery-powered (STIHL RMA)
VIKING GmbH
Hans Peter Stihl-Strasse 5
A-6336 Langkampfen/Kufstein
declares under our sole responsibility that
the machine
lawn mower, manually operated and
battery-powered (STIHL RMA)
conforms to the following EC directives:
2000/14/EC, 2014/30/EU, 2006/42/EC,
2006/66/EC, 2011/65/EU
The product has been developed in
conformance with the following standards:
EN 60335-1, EN 60335-2-77, EN 60335-
2-29
The versions of the standards valid on the
production date apply to development and
production of the products.
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Sven Zimmermann
VIKING GmbH
The year of manufacture and machine
number appear on the rating plate of the
machine.
Measured sound power level:
86,5 dB(A)
Guaranteed sound power level:
87 dB(A)
16. Environmental protection
17. Standard spare parts
The blade fastening screw and
retaining washer must be replaced
whenever replacing or installing the
blade. Spare parts are available
from a STIHL specialist dealer.
18. EU - Declaration of
conformity
manufacturer's
brand
STIHL
type RMA 2.0 RT
serial number 6357
To Next Page
Loading...
