0478 131 8349 A - EN
4
2.1 General
This instruction manual constitutes
original manufacturer’s instructions in
the sense of EC Directive 2006/42/EC.
STIHL is continually striving to further
develop its range of products; we therefore
reserve the right to make alterations to the
form, technical specifications and
equipment level of our standard
equipment.
For this reason, the information and
illustrations in this manual are subject to
alterations.
This instruction manual may describe
models that are not available in all
countries.
This instruction manual is protected by
copyright. All rights reserved, especially
the right of reproduction, translation and
processing using electronic systems.
2.2 Country-specific versions
STIHL supplies machines with different
plugs and switches, depending on the
country of sale.
Machines with European plugs are shown
in the illustrations. Machines with other
types of plug are connected to the mains in
a similar way.
Settings 44
iMow – machine settings 44
Setting the rain sensor 44
Setting the status screen 45
Installation 45
Setting starting points 46
Safety 47
Service 48
Perimeter wire 48
Planning routing of the perimeter
wire 49
Making a sketch of the mowing
area 49
Routing the perimeter wire 50
Connecting the perimeter wire 50
Wire clearances – use iMow Ruler 50
Acute corners 51
Confined areas 51
Installing linking sections 52
No-go areas 52
Secondary areas 53
Corridors 53
Guide loops for offset drive home 55
Accurate mowing along edges 56
Sloping terrain in the mowing area 56
Installing reserve wire 57
Using wire connectors 57
Docking station 58
Docking station controls 58
Notes on mowing 58
General 58
Mulching 58
Active times 59
Mowing duration 59
Home area (RMI 632 C,
RMI 632 PC) 59
Manual mowing 59
Operating the machine 59
Preparation 59
Removing and installing the control
panel 60
Adapting the programming 60
Automatic mowing 61
Mowing independently of active
times 61
Manual mowing 62
Docking the robotic mower 62
Charging the battery 62
Maintenance 63
Maintenance schedule 63
Cleaning the machine 64
Checking the mowing blade wear
limits 64
Removing and installing the
mowing blade 65
Sharpening the mowing blade 66
Removing and installing the carrier
plate 66
Finding a wire break 66
Storage and winter break 67
Removing the docking station 68
Standard spare parts 69
Accessories 69
Minimising wear and preventing
damage 69
Environmental protection 70
Removing the battery 70
Transport 70
Lifting or carrying the machine 71
Securing the machine (lashing) 71
Technical specifications 71
Messages 72
Troubleshooting 78
Service schedule 82
Handover confirmation 82
Service confirmation 82
Installation examples 83
2. Notes on the instruction
manual