EN
61
0478 131 8349 A - EN
Reduction of the mowing duration:
(Ö 11.8)
– Reduced grass growth due to heat, cold
or dryness.
Creation of a new mowing plan: (Ö 11.8)
– The size of the mowing area has been
changed.
New installation: (Ö 11.14)
– New location of the docking station.
– Initial operation on a new mowing area.
15.4 Automatic mowing
● Switching on automatic
mowing:
When automatic mowing is
switched on, the Automatic
symbol appears next to the battery
symbol in the display. (Ö 11.5)
● Starting mowing operation:
The mowing operations are
automatically distributed between the
available active times. (Ö 11.6)
● Ending mowing operation:
When the battery is discharged, the
robotic mower automatically travels
back to the docking station. (Ö 15.7)
A running mowing operation can be
ended manually at any time using the
STOP button. (Ö 5.1)
Activating Homecall on the docking
station also ends the running mowing
operation immediately. (Ö 13.1)
RMI 632 C, RMI 632 PC:
The mowing operation can also be
ended using the app – send the robotic
mower to the docking station. (Ö 10.)
15.5 Mowing independently of active
times
● Activate the docked robotic mower by
pressing a button. This also switches on
the docking station.
Mowing areas with docking station:
● In order to mow a part of the mowing
area that can only be reached via a
corridor, carry or steer the robotic
mower there.
● Immediate mowing:
Call up the Start mowing command
(Ö 11.5) or press the Mow button.
The mowing operation starts
immediately and continues until the
selected time.
● Time-delayed mowing:
Call up the command Start time-
delayed mowing. (Ö 11.5)
The mowing operation starts at the
selected start time and continues until
the selected end time.
● RMI 632 C, RMI 632 PC:
Start mowing using the app. (Ö 10.)
The mowing operation starts at the
selected start time and continues until
the selected end time.
● Ending mowing manually:
A running mowing operation can be
ended at any time using the STOP
button. (Ö 5.1)
Activating Homecall on the docking
station also ends the running mowing
operation immediately. (Ö 13.1)
RMI 632 C, RMI 632 PC:
The mowing operation can also be
ended using the app – send the robotic
mower to the docking station. (Ö 10.)
Secondary areas:
● Carry or steer the robotic mower to the
secondary area.
● Activate the secondary area. (Ö 12.10)
● Immediate mowing:
Call up the Start mowing command
(Ö 11.5) or press the Mow button.
The mowing operation starts
immediately and continues until the
selected time.
● Time-delayed mowing:
Call up the command Start time-
delayed mowing. (Ö 11.5)
The mowing operation starts at the
selected start time and continues until
the selected end time.
Mowing areas that the robotic
mower reaches via a corridor are
only mown if starting points have
been defined in the relevant area.
If necessary, the robotic mower
charges the battery in the interim
and then continues the mowing
operation until the selected end
time.
To Next Page
Loading...
Need help?
General
