SG 51, SG 71
English
10
N Push the locking lever (1)
downwards – the trigger (2) is
locked to reduce the risk of
accidental operation.
Before filling the tank with chemicals,
carry out a test with fresh water and
check all parts of the sprayer for leaks.
N Stand the sprayer on a level
surface.
N Remove the cap from the tank.
N Check the O-ring (1) in the cap (2).
It must be in good condition.
N Fill up with thoroughly mixed plant
protection solution – do not overfill
(no further than max. mark – arrow).
N Fit the cap and tighten it down firmly
with both hands.
To Next Page
Loading...
