Safely store the complete documentation and
pass it on to the subsequent operating compa-
ny when transferring or selling the industrial
truck.
NOTE
Please note the definition of the following re-
sponsible persons: "operating company" and
"driver".
Thank you for reading and complying with
these operating instructions. If you have any
questions or suggestions for improvements, or
if you have found any errors, please contact
the authorised service centre.
Supplementary documentation
This industrial truck can be fitted with unplan-
ned equipment (
UPA
) that deviates from the
standard equipment and/or the variants.
The UPA may be, for example:
●
Special sensors
●
Special attachments
●
Towing devices
●
Customised attachments
In this case, the industrial truck has additional
documentation. This may be in the form of an
insert or separate operating instructions.
The original operating instructions for this in-
dustrial truck are valid for the operation of
standard equipment and variants without re-
striction. The operational and safety informa-
tion in the original operating instructions con-
tinues to be valid in its entirety unless it is
countermanded in this additional documenta-
tion.
The requirements for the qualification of per-
sonnel as well as the time for maintenance
may vary. This is defined in the additional doc-
umentation.
– If you have any questions, please contact
your authorised service centre.
Introduction
1
Information about documentation
55001 801 1555 EN - 12/2020
To Next Page
Loading...
