so keep them away from hot components and
naked flames.
Clean utensils must be used when refilling flu-
ids. It is strictly prohibited to mix different fluids
together (except where specifically indicated
in the operating instructions).
Make sure to protect against fluid splashes. In
the event of a fluid spillage, immediately cover
the spillage using an appropriate adsorbent
and dispose of the fluid/adsorbent mixture in
accordance with regulations.
Code Designation Applies to Amount added
A
L-HM32 Hydraulic system 0.48 L
B
Grease (contains
MoS2)
Gearbox 100 g
Servicing
Pre-service preparations
Adopt all necessary safety measures to avoid
accidents during servicing. The procedure be-
low must be followed:
●
Park the truck correctly.
●
Pull the key switch and disconnect the bat-
tery plug out to prevent the truck from being
accidentally started.
●
If you need to work underneath a raised
truck, take effective measures to prevent
accidents such as the truck overturning or
slipping.
Maintenance
6
Servicing
715001 801 1555 EN - 12/2020
To Next Page
Loading...
