Battery charger
Charging precautions
– The truck must be parked in a well-ventila-
ted room.
– There must be no metal objects on the sur-
face of the battery.
– Before the start of the charging procedure,
check all cable connections and plug con-
nectors for obvious damage.
– Make sure that the charger is not connected
to the circuit before connecting or discon-
necting it.
– The safety regulations supplied by the bat-
tery and charging station manufacturer
must be strictly observed.
Charging procedure
– Ensure that charging requirements are
complied with.
– Park the truck correctly.
– Open the swivelling hood (1).
– Unplug the power current plug (2), then
plug it into a suitable power source.
CAUTION
The charging voltage range is 100–240 V, 50–60 Hz.
Do not exceed this voltage range.
Charging indicator light
LED
status
phenome-
non
Malfunction analysis Exclusion method Description
Red light remains
lit
Normal status No Charger is charging
Battery use and maintenance
5
Battery charger
62 5001 801 1555 EN - 12/2020
To Next Page
Loading...
