NOTE
It is mandatory to specify the hand-arm vibra-
tions, even where the values do not indicate
any danger, as in this case.
CAUTION
The value expressed above can be used to compare
forklift trucks of the same category. It cannot be used
to determine the operator's daily exposure to vibra-
tions during real operation of the truck; these vibra-
tions depend on the conditions of use (floor condi-
tions, method of use etc.) and therefore daily expo-
sure must be calculated using data from the place of
use.
Safety
2
Basic principles for safe operation
295001 801 1555 EN - 12/2020
To Next Page
Loading...
