Still STEDS R70-16 User Manual

34
4
5
02
Steer axle
9
Track rod removal
The steer axle is fitted with two track rods arranged
between the steering cylinder and the two stub axles.
1 stub axle
2 piston rod
3 sealing rings
4 roll pins
5 pin
6 track rod
7 ball joint
- Remove the roll pins (4).
- Using a press, press out the pins (5).
Track rod installation
- Reverse the removal procedure.
Install pins cylinder end with a maximum press
force of
max. 21 kN
and pins stub axle end with a maximum press
force of
max. 26 kN
Workshop Manual 7052/56/74-76, 7054/58/77-79

Still STEDS R70-16 Specifications

General

Brand	Still
Model	STEDS R70-16
Category	Forklifts
Language	English