To Next PageTo Next Page
Need help?Do you have a question about the Stober FDS 4000 and is the answer not in the manual?
Provides essential guidance for installing and setting up the frequency inverter.
Warns about the dangers of high touch voltage and electric shock.
Details the procedure for navigating and changing inverter parameters.
Lists essential parameters that must be specified before initial operation.
Explains how to select and configure the motor parameters for optimal performance.
Details how to use analog inputs or frequency signals for speed control.
Explains how to define and select fixed speed references using digital inputs.
Details the default meanings and programming of binary inputs for specific functions.
Explains how to set and manage torque limits for motor protection and control.
Explains how to manage and switch between different parameter sets.
Covers the setup and commissioning of speed feedback using an incremental encoder.
Explains the methods for acknowledging and resetting inverter faults and events.
Explains how to define target positions and sequence movements using process blocks.
Details the methods for specifying absolute or relative target positions for movement.
Outlines the steps for activating and commissioning the positioning control function.
Explains the process of establishing a known reference position for the drive.
Provides an overview of the synchronous running and electronic gearbox features.
Provides measures to minimize divergence between master and slave during power off.
Covers parameters specific to motor configuration, selection, and characteristics.
Details parameters for configuring inputs, outputs, and communication interfaces.
Explains parameters related to the positioning machine functions and process blocks.
Details parameters for defining and controlling process blocks for sequential movements.
General
