Need help?Do you have a question about the Stober SI6A062 and is the answer not in the manual?
Defines the intended use of SI6 drive controllers and PS6 supply modules.
Outlines the 5 safety rules for working on machines and systems.
Explains the function of DC link capacitors and the need for DL6B modules.
Provides guidance and rules for determining maximum devices and total load in UL-compliant systems.
Emphasizes that installation work is permitted only when no voltage is present and to observe 5 safety rules.
Emphasizes safety precautions and checks before making connections, including discharge time.
Recommends testing the projected axis model using the jog control panel before application parameterization.
Describes diagnostic LEDs on the PS6 supply module and their meanings for RUN, ERROR, and WARNING states.
Explains diagnostic LEDs on STOBER drive controllers indicating status, physical connection, and communication.
Provides an overview of drive controller events, their causes, and actions.
Provides safety instructions for device replacement, emphasizing de-energizing and discharge time.
Details steps for replacing a drive controller, including safety warnings and requirements for interchangeability.
To Next Page
General
