5 | System configuration STOBER
32
02/2019 | ID 442728.05
DL6B Quick DC-Link insulation end section
ID No. 56659
Insulation end sections for the left and right termination of the group, 2
pcs.
5.1.4 Controller
The development of the MC6 motion controller and its integration into the STOBER product
portfolio opens up new solutions for drive technology, especially for complex functions with
demanding requirements for timing and precision.
The SI6 drive controller is connected to the MC6 using EtherCAT.
Detailed information about the MC6 motion controller can be found in the corresponding
manual, see the chapter Detailed information [}245].
To Next Page
Loading...
