- 12 -
Health & Safety
· Before using this equipment, study the entire Owners Manual to become famil-
iar with its operation. Do not allow untrained or unauthorized personnel, espe-
cially children, to operate this equipment. Use only factory authorized parts for
service.
· When warning decals are destroyed or missing, contact the Manufacturer imme-
diately at 1-800-888-9926 for replacement. For the safety of yourself and others,
it is imperative that the following rules are observed. Failure to do so may result
in serious injury or death.
· This notation appears before warnings in this manual. It means that the follow-
ing steps must be carried out to avoid the possibility of personal injury or death.
These warnings are intended to help the technician avoid potential hazards
encountered in normal service procedures. We strongly recommend the reader
take advantage of the information provided to prevent personal injury or injury to
others.
Follow Safety Instructions
· Carefully read all safety messages and decals in this manual and on your machine
safety signs. Keep decals in good condition. Replace missing or damaged
decals. Be sure new equipment components and repair parts include the current
safety signs. Replacement safety signs and decals are available through your
dealer.
· Learn how to operate the machine and how to use controls properly. Do not let
anyone operate without instruction.
· Keep your machine in proper working condition. Unauthorized modifications to
the machine may impair the function and/or safety and affect machine life.
· If you do not understand any part of this manual and need assistance, contact
your dealer.
Understand Signal Words
· A signal word DANGER, or CAUTION is used with the safety-alert symbol.
DANGER identifies the most serious hazards.
· DANGER or WARNING safety signs are located near specific hazards. General
precautions are listed on CAUTION safety signs. CAUTION also calls attention
to safety messages in this manual.
Safety Precautions
DANGER
WARNING
CAUTION
To Next Page
Loading...
