Stoneridge Optimo - 81 CS - Configuration System

34
10. 1381CS – Configuration System
 Tap and a message “Please check the 1381 Tachograph (Universal model rev 2.1) is
connected using a wired connection before beginning the Configuration.” is
displayed. Do not use this feature when in wireless operation.
 Then a new message “Determining the Tacho Type” is displayed whilst Optimo
confirms a 1381 tachograph is connected. This enables configuration of 1381 tachographs to
parameters of different vehicle types.
 A valid workshop card must be inserted and PIN authenticated to reconfigure all activated
tachographs.
 Choose manufacturer by tapping appropriate icon, or tap “Verify Tachograph” to input a serial
number.
 If verification successful, make and model of a configured tachograph is displayed.