Stoneridge Optimo - Annex C - Optimo Error Codes

52
Annex C – Optimo Error Codes
Application Codes
APPLICATION
Error Code
MK3 Programmer
0x00**
Codes 01 to 10 / 1F / 20 to 29 / D0 to FF are valid
SE5000 Configuration System
0x01**
Codes 01 to 10 / 1F / D0 to FF are valid
Tachograph Swap
0x02**
Codes 01 to 10 / 1F / D0 to FF are valid
Sensor Test
0x03**
Codes 01 to 10 / 1F are valid
Application Sheets
0x04**
Codes D0 to FF are valid
Cross Reference
0x05**
Codes D0 to FF are valid
Workshop Settings
0x06**
Codes D0 to FF are valid
Calibration
0x07**
Codes D0 to FF are valid
Product Upgrade
0x08**
Code C1 is Valid
Taximeter
0x09**
DTCO1381 Configuration
System
0x0A**
Wireless Brake
0x0B**