Stoneridge Optimo - 13 Tacho Swap

39
13. Tacho Swap
 Tapping displays which tachograph is connected and gives options to “Read” or “Send”
data. This function enables removal and fitment of a tachograph in a seamless
process. For same tacho type exchange all parameters are transferred, for
cross type exchange only calibration parameters are transferred.
 Note: the new tachograph must be configured prior to performing the tacho swap operation. For
digital tachographs this should be done before the unit is activated.
 Tap “Read” and Optimo reads all data from the tachograph and gives an option to view stored data.