To Next PageTo Next Page
Need help?Do you have a question about the Stoneridge OPTIMO 2 and is the answer not in the manual?
General| Brand | Stoneridge |
|---|---|
| Model | OPTIMO 2 |
| Category | Motherboard |
| Language | English |
Describes the function of icons typically found in the taskbar.
Details the process of connecting the Optimo² to a tachograph.
Explains the steps for calibrating and programming the tachograph.
How to read and modify data parameters on the tachograph.
Accessing and viewing tachograph system information.
Performing bench tests on digital and analogue tachographs.
Determining the 'w' factor using a fixed distance method.
Simulating vehicle speed for testing purposes.
Performing the C3 RPM test.
Reading and understanding Diagnostic Trouble Codes (DTCs).
Performing the k factor test.
Calculating DIL switch settings and factors.
Determining the 'w' factor using an external device and fixed distance.
Performing rolling road tests and speed verification.
Testing and adjusting the tachograph clock time.
Entering the workshop card PIN for certain operations.
Displaying serial data from the tachograph.
Displaying CANbus data from the tachograph.
Performing the 1000m test for k factor verification.
Configuring sensor settings and pairing sensors.
Performing a tachograph reset operation.
Configuring SE5000CS using Stoneridge provided configuration files.
Creating, saving, and managing user-defined configurations for SE5000CS.
Lists error codes specific to different Optimo² applications.
Provides a detailed list of general error codes and their categories.
