37
10. 1381CS – Configuration System
▪ Tap the icon and a message “Please check the 1381 Tachograph Universal model is connected using
a wired connection before beginning the Configuration.” is displayed. Do not use this feature when
in wireless operation.
▪ Then a new message “Determining the Tacho Type” is displayed whilst Optimo² confirms a 1381
tachograph is connected. This enables configuration of 1381 tachographs to parameters of different
vehicle types.
▪ A valid workshop card must be inserted, and PIN authenticated to reconfigure all activated
tachographs.
▪ Choose manufacturer by tapping appropriate icon or tap “Verify Tachograph” to input a serial
number.
▪ If verification successful, the make and model of a configured tachograph is displayed.
To Next Page
Loading...