39
11. Tacho Swap
▪ Tapping this icon displays which tachograph is connected and gives options to “Read” or “Send”
data. This function enables removal and fitment of a tachograph in a seamless process. For same
tacho type exchange, all parameters are transferred. For cross type exchange, only calibration
parameters are transferred.
▪ Note: the new tachograph must be configured prior to performing the tacho swap operation. For
digital tachographs this should be done before the unit is activated.
▪ Tap “Read” and Optimo² reads all data from the tachograph and gives an option to view stored
data.
To Next Page
Loading...