WWW.STOREITCOLD.COM
SUPPORT@STOREITCOLD.COM
4
2019 © Store It Cold, LLC. Rev 2019-04A All Rights Reserved.
BEFORE YOU START
Read this guide entirely and familiarize yourself with the project before you make a trip to the
hardware store. Plan your project wisely and make a list of all your materials and tools. Depending on
your needs or particular situation, you may want to modify or skip certain parts of this guide.
Please ensure that a flat level and structurally sound surface is available to place your cooler.
“TURN KEY” COOLBOT WALK-IN COOLERS
If a DIY cooler project is not your cup of tea, you lack the construction experience necessary for a project
like this, or just simply lack the time to complete a DIY cooler, we got you covered! CoolBot offers turn-
key commercial grade pre-fab coolers in many standard sizes which include the new CoolBot Pro and the
A/C. For more information please visit us at:
https://www.storeitcold.com/coolbot-walk-in-cooler/
ECO-COOLER
Your fastest and most economical DIY solution is an “Inside” or covered (out-of-the-rain) cooler room. If
you are building your cooler inside AND your cooler will be set to cool above 36°F, a concrete pad (or
similar flat level surface) is all you need for a floor. Additionally, you won’t need a roof and/or exterior
finishing siding panels (just OSB will do). Skip the Floor Foundation and Roof Assembly Sections, and
their corresponding materials from the Materials List.
FLOOR RECOMENDATION
If you are building you cooler “Outside” OR on an elevated surface such as a deck, a second floor, above
a crawling space, OR if your cooler needs to be at or below 36°F, you SHOULD build an insulated Floor-
Base. A non-insulated wood building floor will not suffice.
To Next Page
Loading...
