USING THE HOB - METAL SOLID PLATE
Before using the hob for the rst time, it
should be primed and seasoned - refer to
the instructions in the cleaning section.
To switch on a hotplate element
Turn the selected hotplate control knob
clockwise or anticlockwise, depending on
the required setting.
The high speed hob ring(s) are identied
by its central red spot. A high speed hob
ring has a faster response time. To switch
off, return the control knob to the “off”
position.
Using the hob
Do not operate the hotplate elements
without a pan on, or leave them running
after removing a pan.
The electric hob uses a sealed hob
system where heat is transferred by
conduction.
Decorative covers should not be used
over the hotplates as these can trap
moisture and cause intense heat.
When you have nished cooking
check that all controls are in the off
position.
To Next Page
Loading...
