CLEANING
REMOVING OVEN PARTS FOR
CLEANING
Inner Door Glass
• The inner door glass panel can be
removed for cleaning but it must be
replaced the right way up. If there is
any writing on the glass, you must be
able to read it clearly when the cavity
doors are open.
• Always make sure that the glass is
pushed fully into the Stop position.
• To remove the glass panel, open the
door wide, hold the top and bottom
edges and slide out.
• Warning: DO NOT operate the
appliance without the glass panel
correctly tted.
• For your safety, glass door panels
are made of toughened glass. This
ensures that, in the unlikely event
that a panel breaks, it does so into
small fragments to minimise the risk of
injury. Please take care when handling,
using or cleaning all glass panels, as
any damage to the surfaces or edges
may result in the glass breaking
without warning or apparent cause at
a later date. Should any glass panel be
damaged, we strongly recommend that
it is replaced immediately.
Shelf Runners
• Shelf runners can be removed to
enable you to clean them thoroughly.
Make sure they are cool to touch and
then grasp the runners and slide out
of their hanging holes.
PULL OUT TO CLEAN
To Next Page
Loading...
