Need help?Do you have a question about the Strand C21 and is the answer not in the manual?
General| Brand | Strand |
|---|---|
| Model | C21 |
| Category | Racks & Stands |
| Language | English |
Describes the physical construction, materials, and layout of the C21/EC21 dimmer rack.
Introduces power modules as the high-power switching section of the dimming system.
Describes IGBT dimmers offering quiet, efficient dimming for various loads and protection.
Describes the housing for control electronics, including processor modules and power supplies.
Describes the processor module with LCD, keypad, and LEDs for setup and control.
Details configurable rack settings like name, phasing, voltage, and patching.
Explains settings for dimmer response profiles, response times, and voltage compensation.
Lists built-in safety features like cooling, over-temperature shutdown, and non-volatile RAM.
Describes Vision.Net control stations for architectural lighting, including room control and scenes.
Covers network settings including IP address, subnet mask, host name, and gateway.
Sets the response rate of dimmers to control level changes (Fast, Normal, Slow, etc.).
Configure Vision.Net bridging, ID, area, and refresh settings.
Resets the system configuration to factory default settings.
Procedure to select and upload a firmware file for updating the system.
Saves the current system configuration parameters to a backup area.
Save, restore, and download/upload backup and factory configurations.
Configures dimmer circuits, operating modes, and dynamic response settings.
Configure Vision.Net bridging, ID, area, and refresh settings.
To Next Page